Building floating fish cages involves more than deciding how many net compartments to install. Other important aspects need to be considered, including walkways for feeding, areas where workers can carry out inspections, and the space required when nets need to be lifted or replaced.
These details may seem simple on a layout drawing. However, once the cages are installed on the water, a poorly planned layout can make daily operations difficult.
For example, a walkway that is too narrow can be inconvenient when workers carry feed. Similarly, net compartments placed too close together may leave insufficient space for maintenance.
For this reason, the use of HDPE floating cubes should be planned alongside the net compartment layout and operational requirements.
This article explains how to design floating fish cages, from determining walkways and dividing net compartments to selecting floating structures and preparing maintenance access from the beginning.
Floating Fish Cages Are More Than Just Net Compartments
Floating fish cages are aquaculture facilities that use frames and floats to support net enclosures in the water. This system is also known as floating net cages or KJA in Indonesia.
Floating net cages can be used in lakes, reservoirs, and other bodies of water that meet aquaculture requirements.
In general, a floating fish cage consists of several main components: a frame, floats, net enclosures, inspection walkways, and a mooring system.
Each component serves a different purpose. The net enclosures provide space for raising fish, while the floats keep the structure on the water's surface. Walkways support workers' activities, while anchors and mooring lines help maintain the position of the cages.
In structures that use floating cubes, the floating modules can be connected to form walkways around the net compartments.
This arrangement allows workers to walk between several compartments without always needing a boat to move from one point to another.
However, the configuration should follow the needs of the aquaculture operation. A fish cage with two compartments will naturally have different access requirements from one with eight or more compartments.
Check Water Conditions Before Planning the Layout
Before drawing the fish cage layout, first examine the conditions of the water where the cages will be installed.
Water depth, current direction, waves, changes in water levels, and the condition of the waterbed will influence the structure and mooring system required.
In reservoirs, for example, changing water levels can affect the position of the access walkway connecting the cages to land. Meanwhile, in areas with currents, the net arrangement needs to be considered to prevent the nets from easily changing shape under water pressure.
Several aspects should be checked before deciding on the layout:
Water depth at the expected lowest and highest levels.
Current direction and strength, as well as wind and wave conditions.
Water quality suitable for the fish species to be raised.
Distance between the fish cages and the shore or loading and unloading area.
Space for boat movement and access to each fish cage unit.
Local regulations on water use and the environmental carrying capacity of the site.
These checks are important because fish cages of the same size may not be suitable for two different locations.
The distance between the bottom of the net enclosure and the waterbed also needs attention. The net should not come into direct contact with the bottom when water levels drop or when its shape changes due to currents.
By understanding site conditions first, the fish cage design can be adjusted before assembly begins.
Walkways That Make Daily Operations Easier
Walkways are among the most frequently used parts of a floating fish cage operation.
Every day, workers need to carry feed, observe fish conditions, inspect nets, and perform other tasks around the compartments. Therefore, walkways should not be treated merely as connections between compartments.
A well-designed walkway should allow workers to carry out their tasks without obstructing access to other parts of the fish cage.
Determining Walkway Width
Walkway width should take into account the number of workers, the items they carry, the equipment used, and the space needed to move during inspections.
As an initial illustration, a walkway measuring 1 meter wide can be used in a fish cage layout simulation. However, this figure is not a safety standard that applies to every location.
The actual width requirement must be assessed based on the activities and risks involved, including when workers carry loads or need to pass one another.
Areas used for lifting nets or handling harvested fish may require wider working spaces.
Determining Main Walkways and Paths Between Compartments
For fish cages with several compartments, the main walkway should ideally lead toward the center or the area used most frequently.
From this main walkway, workers can reach each net compartment.
This arrangement makes it easier to organize daily activities. Workers responsible for feeding do not have to walk around every side of the structure just to reach the farthest compartment.
Paying Attention to Walking Surfaces
Walkway surfaces will frequently become wet due to rain, splashes, and aquaculture activities.
For this reason, walkway materials should be selected with wet conditions in mind.
Floating cubes with textured, anti-slip surfaces can provide better grip for walking. Even so, the surfaces still need to be cleaned of mud, algae, and debris that could make the walkway slippery.
Worker safety should also be supported by appropriate equipment, including personal flotation devices and handholds in areas where they are needed.

Dividing Net Compartments Without Sacrificing Access
Once the walkways have been determined, the next step is to divide the area into several net compartments.
The size and number of compartments can be adjusted according to the fish species, scale of aquaculture, water depth, and farming system used.
Compartments can be arranged in one row, two rows, or grouped into a particular configuration. No single arrangement is always the best choice for every location.
What matters is ensuring that each compartment remains accessible and can be maintained.
Provide Access to the Sides of Each Compartment
Net compartments should have adequate access points for feeding, inspection, fish handling, and net lifting.
In layouts with walkways surrounding each compartment, workers can reach the edges more easily. However, this configuration requires a larger walking surface than designs with limited access.
The chosen arrangement should balance ease of operation with the amount of material required.
Match the Nets to the Compartment Dimensions
The dimensions of the net enclosures must match the planned openings and depths.
Net material, mesh size, and enclosure depth should be selected according to the species and size of fish being raised.
Net connections also require attention. Fastening ropes should be positioned at suitable points to prevent the nets from shifting easily while still allowing them to be detached when necessary.
There should also be sufficient clearance beneath the nets so the enclosures do not constantly rub against the waterbed.
Prepare Space for Net Replacement
Nets used continuously can become covered with algae or other organisms that attach to their surfaces. This can restrict water exchange through the mesh.
Therefore, the process of cleaning and replacing nets should be considered during the planning stage.
Make sure there is access for lifting nets, placing work equipment, and moving nets that need cleaning.
Avoid filling all the space around the compartments with stored items or additional structures that could make these tasks more difficult.
Example Layout of a Four-Compartment Floating Fish Cage
To understand how walkways and compartments can be divided, consider a sample design with four net compartments.
Suppose each compartment is planned with an opening measuring 3 × 3 meters. The four compartments are arranged in two rows and two columns.
Walkways are placed around the outer perimeter and form dividing paths through the center. In this example, all walkways are 1 meter wide.
With this arrangement, the overall structure measures approximately 9 × 9 meters.

Calculating Floating Cube Requirements
When using floating cubes with a surface size of 50 × 50 cm, four cubes form an area of 1 m².
The initial calculation for this example is:
| Component | Calculation |
|---|---|
| Total area | 9 × 9 = 81 m² |
| Total openings of 4 net compartments | 4 × (3 × 3) = 36 m² |
| Walkway area | 81 − 36 = 45 m² |
| Floating cubes per m² | 4 units |
| Estimated floating cubes | 45 × 4 = 180 units |
Therefore, the illustrative arrangement requires approximately 180 floating cube units for a single layer of walking surfaces.
This number is an initial geometric calculation, not a final construction design that has been verified as safe.
Actual requirements must still account for the connection system, working loads, stability, net positioning, mooring system, and water conditions.
If the compartment dimensions or walkway width change, the number of floating cubes required will also change.
This type of calculation helps provide an initial estimate of material requirements before the design undergoes further review.
Simulate your floating cube project using the floating cube editor.
The Role of HDPE Floating Cubes and Modular Pontoons
Floating materials are an important part of fish cage construction.
One option for creating floating walkways is to use cubes made from High Density Polyethylene, or HDPE.
These cubes have sealed hollow interiors that provide buoyancy when placed in water. Several units can be connected to form walking surfaces in specific configurations.
This connected system is often referred to as a modular pontoon, because the arrangement of modules can be adjusted to suit project requirements.
For floating fish cages, modular pontoons can be used as connecting walkways, inspection areas, and other structures that support daily operations.
Karpinus HDPE Floating Cubes
PT Karya Pilar Nusantara supplies Karpinus Floating Cubes for various floating construction applications, including floating net cages.
These products are made from HDPE and measure 50 × 50 × 40 cm per unit.
The modular system allows the cubes to be arranged according to the planned configuration. Each module is connected through designated connection points using suitable locking accessories.
The cube surfaces also feature an anti-slip texture to help provide secure footing in aquatic environments.
In practice, the number and configuration of cubes should not be determined solely by walkway area. Worker loads, equipment, net lifting points, and the effects of currents and waves must also be considered.
Information about the products, dimensions, and accessories is available on the Karpinus Floating Cubes page by PT Karya Pilar Nusantara.
Anchors, Boat Access, and Inspection Points
Once the walkways and compartments have been included in the design, the next step is to determine how the fish cages will be kept in position.
Floating fish cages are affected by wind, currents, waves, and changes in water levels.
Therefore, the anchor and mooring line system should not be selected arbitrarily.
Determining the Anchoring System
Anchors help maintain the position of the fish cage structure in the water.
The number, type, location, and capacity of anchors must be based on calculations that consider waterbed conditions and the forces acting on the structure.
Mooring lines must also account for changes in water levels and the movement of the fish cages.
A mooring arrangement that is too rigid or too loose can cause problems when water conditions change.
Determining Where Boats Can Dock
If the fish cages are accessed by boat, determine where workers will board and disembark from the beginning.
This area should be easy to reach without interfering with the net compartments or main walkway.
Where boats may come into contact with the structure, edge protection such as fenders can be considered according to operational needs.
Also plan how feed, equipment, and harvested fish will be transferred so that items do not have to pass through unsuitable walkways.
Preparing Inspection Points
Cube connections, mooring lines, net attachment points, and the anchoring system should be accessible for periodic inspection.
For this reason, avoid placing all important components in difficult-to-reach areas.
Inspection access planned from the beginning will make it easier for workers to tighten connections, replace fasteners, or examine the condition of the structure.

Preparing Maintenance Access from Day One
Fish cage maintenance should not be something that is only considered after several months of use.
From the moment the cages begin operating, workers need to routinely inspect the nets, floats, connections, and water conditions.
Nets that become covered with algae or dirt need to be cleaned according to farming conditions. Inspections are also necessary to ensure that no sections are torn or detached.
For floating cube structures, areas requiring attention include walking surfaces, locking pins, connections between units, and mooring points.
Planned maintenance can be divided into several activities.
Daily inspections are carried out to check the overall condition of the fish cages, worker access, fish conditions, and any possible problems with nets or moorings.
Periodic inspections are more comprehensive and include cleaning nets, checking connections, and examining parts of the structure exposed to repeated loads or movement.
Inspections after severe weather are needed when strong waves or currents may have shifted the position of the cages or caused damage.
Maintenance schedules and methods should be adjusted to site conditions, the type of aquaculture operation, and the instructions for using each component.
Well-planned access makes these activities easier to carry out without unnecessarily dismantling parts of the structure.
Layout Mistakes to Avoid
Several common mistakes should be checked before a floating fish cage design is put into practice.
The first mistake is focusing too much on the number of net compartments. Adding compartments may expand the farming area, but it also increases requirements for access, maintenance, and load management.
The second mistake is designing walkways without considering the activities that will take place on them. A walkway wide enough for walking may not be adequate for handling feed or lifting nets.
The third mistake is calculating floating cube requirements solely based on the total area of the design without separating walking surfaces from net openings.
Another mistake is postponing the planning of the anchoring system and net replacement access until installation is already underway.
These issues can lead to design changes and additional material requirements.
By planning walkways, compartments, and inspection points from the beginning, construction requirements can be estimated more accurately.
FAQ About Floating Fish Cage Design
What Is the Ideal Size for a Floating Fish Cage Compartment?
There is no single compartment size that is ideal for every aquaculture operation. Dimensions should be adjusted according to fish species, stocking quantity, water depth, and operating methods. The 3 × 3 meter compartment example in this article is used to explain walkway arrangements, not as a standard fish cage size.
Can HDPE Floating Cubes Be Used for Floating Net Cages?
Yes. HDPE floating cubes can be connected as part of a floating structure, particularly to create walkways and access around net compartments. However, the configuration, connections, buoyancy, and mooring system must be adjusted to the construction requirements.
Does Every Compartment Need to Be Surrounded by a Walkway?
Not necessarily. Walkways can be designed according to workers' activity patterns and the access requirements of each compartment. However, the design must still allow feeding, inspections, maintenance, and net replacement to be carried out safely.
Do Floating Fish Cages Need Anchors?
Fish cages placed in open water require a suitable positioning system. This system may use anchors or other mooring methods designed according to site conditions. Mooring capacity and configuration must be calculated using appropriate technical methods.
Can Modular Fish Cage Structures Be Expanded?
In principle, modular systems allow units to be adjusted or added. However, expanding fish cages must be accompanied by a reassessment of buoyancy, load distribution, connections, moorings, and the environmental carrying capacity of the water body.
Building Fish Cages That Are Ready for Operation and Maintenance
A well-designed floating fish cage is not measured only by the number of net compartments that can be built.
Walkways, maintenance access, boat docking areas, and mooring systems also determine how the cages can be operated over the long term.
HDPE floating cubes can be an option for creating modular walkways and platforms as needed. However, the number of modules and their configuration must still be calculated according to the function of each area and local water conditions.
PT Karya Pilar Nusantara supplies Karpinus Floating Cubes along with supporting accessories for floating construction applications.
When planning floating fish cage requirements, the overall area, number of net compartments, and site conditions can serve as initial information when consulting the Karya Pilar Nusantara team.
With proper planning, fish cage structures can provide not only suitable net compartment arrangements but also access that makes aquaculture operations and maintenance easier.



